Rear Cantilever
 |
No items matching your keywords were found.
|
No items matching your keywords were found.
Rear Cantilever
trek 4900 alpha (Is this good bike?
trek 4900 alpha
Is this good bike.
MEASUREMENTS:
17.5"
134mm Rear Spacing
 FRAME & FORK:
Frame: Trek Alpha Aliminum
Fork: Rock Shox Pilot c
Serial # ww0714860
#'s stamped on BB Tube
WTU
SC-10-02 28960635V TBI 0406
1035U023
COMPONENTS:
VP Aheadset Headset
Promax Brake Levers
Promax Cantilever Brake Calipers
Shimano Alivio (Triple ) Front Derailleur
Shimano Deore Mega 9 (8-9 speed) Rear Derailleur
Shimano 8sp/triple Trigger Shifters
Shimano (Triple) 175mm Crankset
Shimano Bottom Bracket
Shimano 32 spoke Hubs
Trek Saddle by Velo
Bontrager Seat Post
Bontrager 85mm Stem
Bontrager CrowBar 5 Degree
Shimano IG Chain
SRAM 8sp Cassette
Bontrager Corvair Asym 26" Rims
Bontrager Jones AC 26x2.1 Tires
K79 Pedals
Is this good bike?
and how much should I pay?
This is a sturdy, inexpensive mountain bike that should be good for several years of riding. The components are nothing special, just servicable. It should be great for casual trail riding. If you get into racing or taking long rides, you'll probably want to upgrade.
Brand new, this bicycle probably cost $400-$500. You don't mention what condition it is in, how it has been serviced or how many folks have owned it. Still I might venture it is worth $100-300.
There are a number of reviews on Mountain Bike Review.com. You might want to check them out:
http://www.mtbr.com/reviews/2003_hardtail/product_121387.shtml
Hope this helps you out.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
|
No items matching your keywords were found.
| Account limit of 2104 requests per hour exceeded. |
Bad Boy Chopper Motorized Bicycle With Lights/Horn
Can I use any centre-pull cantilever brakes with my 1990 touring bike?
Hi. I want to replace the rear cantilever brakes on my Nigel Dean touring bike. It dates from about 1990 (maybe a little earlier). Do all bikes equipped for cantilever brakes have the same size bolts to house them? Or do they vary from bike to bike? I'd like to know because I want to get some cheap ones off ebay!
To be sure; take a bolt off of you present bike's brakes and take it to the hardware store or LBS to get the diameter and thread dimensions.
Odds are they are they are the same.
Easy enough to check though.
