ok so i want to customize my downhill bike and well what i want to do is repaint the frame fork and pedals and i need some advice like what kind of paint to use how to go about doing this and if you know any sites that sell custom colored components like discs rims chains cranks anything go ahead thanks for the help
You are in over your head....leave the bike alone and ride it!
Besides if you paint your fork it is no longer a custom anything - it is essentially worthless once you deface" it. If the bike is worth anything in the first place your best bet is to leave it as is and at best just upgrade components on the bike and that is all you should do!
Mountain bikes are specially meant for rough and rugged terrains. These extra traction and shock absorbing mountain bicycles are provided with fat knobby tires.
However, a full front and rear suspension is becoming quite a common factor nowadays with bikes meant for mountain rides. Some bikes of this particular variety are fitted with bar ends on the handlebars, but with recent trends the use of handlebars and extensions are becoming less and less popular.
Mountain bicycles have both 26 and 29 inches wheels. The larger wheels of this bike type have better rolling capacities over rocks and boulders. Moreover, wheels, which are larger in diameter, also bring about an enhancement in rotational weight giving way to stable acceleration.
Mountain Bicycles Kings On Rugged Roads
Based on suspension, mountain bicycles are broadly graded into four different kinds:
Bikes with dual or full suspension, These bikes have front suspension fork and rear suspension with a rear shock and linkage that is ready to make the rear wheels move on pivots
Hardtail bikes, These bikes have frames with no rear suspension and they are often supplied with front suspension forks
Soft Tail Bikes, These bikes have frames with small amount of rear suspension. The bikes are activated by flex of the frame rather than the pivots
Fully rigid bikes, These bikes have a sub-type of hardtail along with rigid fork system
The Different Types Of Mountain Bicycles
The Cross-Country Mountain Bike
This bike variety has small amount of suspension on the front or on the rear. These bicycles are comparatively light because they are constructed with lightweight materials both in frame construction and in components.
Some XC bike varieties of this particular type are without any suspension. They make use of rigid front fork that helps in saving weight. Here, the skill of the rider to pass through rough terrains is more important.
Freeride Mountain Bike
These are very similar to enduro bikes and emphasize more on weight and enhanced suspension. These bikes have ample suspension and they are mostly constructed with heavier materials. Freeride bikes are absolutely versatile and they are fantastic for uphill travel. The frame angles of such bikes are usually steeper in comparison to downhill bikes. Most freeride bikes are 30 to 45 pounds in weight.
Trials Mountain Bike
These are trial specific bikes. Most of these bikes are without any suspension. The contemporary trial bikes come without seats as most of the time the rider is out of the saddle. This bike is particularly lighter than other mountain bicycles and it weighs between 15 to 25 pounds. The lightweight makes it easier for the biker to maneuver the bike.
Single-Speed Mountain Bike
This is a kind of mountain bike with one set gear ratio. The ratio of the gear depends on the kind of terrain the bike crosses, the skill and strength of the bike rider and the size of the bike too. A single-speed bike is completely rigid having tough steel frames. If you want to ride a single-speed bicycle on mild to moderate cross-country terrains you have to be strong and active.
North Shore Mountain Bike
North shore mountain bike is genuinely constructed for rough and rugged land surfaces. A rider of this particular bike type has to exhibit lots of skill and balance while riding the bike. This bike is a wonderful combination of freeride and downhill bikes.
The other mountain bike varieties include Enduro Mountain Bike, Downhill Mountain Bike and Dirt Jumping Bike.
Most modern bikes meant for mountains have lighter and stronger frames with innovative design and form. The geometry of these bikes encourages vigorous riding over several obstacles like logs, rocks, wooden bridges and manually fabricated ramps. In the front, the bikes have three gears and it has 7, 8, 9, or 10 gears at the rear wheel position.
Some notable companies who have introduced the latest models of mountain bicycles include Fox, Manitou and Rock Shox along with other significant bike manufacturers. It is quite likely for you to make mistakes while riding a mountain bike. The mishaps generally take place due to equipment failure or misjudgment on the part of the rider.
Thus, several companies have come forward with protective gears referred to as armors to provide full protection from injuries. Some essential upper body protectors for riders include spine protector, full-face helmets and backpack hydration system.
It is quite an established fact that mountain bicycles are aptly designed following the present trend and demand. They are in fact the dream of every spirited and efficient mountain biker.
About the Author
Robert Sheehan is a freelance writer and co-owner of
http://www.bicycles-are-us.com Visit Robert And
read more about bicycles at
here…
good luck.